HSMANUAL-255 February 2026 11|Page Classic Pullet Pan Feeding System Step #7: Install the feeder assembly on the pipe so that the Anti-Rotation Device nests inside the cone bottom slot as shown and the feed tube hole is centered over the cone bottom. Step #8: Slide the HS8000-21 Cone Top in place from the side until the center tab locks in place as shown. Cone Top should now be secure from sliding side-to-side. Step #9: Begin installing the pan by orienting the pan upside down and placing the hook on the grille as shown so it can then swing in the downward position.
RkJQdWJsaXNoZXIy MTA3MzU=