Feed Bin Anchor Bolt Center Pin Drive - 5/8"

5/8" diameter center pin anchor bolts used to secure feed bins to concrete pads. Can also be used to secure other equipment to concrete pads. Each anchor bolt includes a serrated, flanged nut and will not require a washer. Priced/sold each.

• 4" anchor bolt should be used on pads at least 6" in depth.*
• 6" anchor bolt should be used on pads at least 8" in depth.

Instructions:

First, mark intended drilling depth on bit. Be sure to leave enough of the threaded end above the mounting surface to properly secure load. Next, drill anchor hole in concrete, remove residue and insert anchor bolt. Then, hammer pin into the center of the bolt to expand bolt base. Finally, use included nut/washer combo to tighten down and secure feed bin mounts.

*Do not use 4" anchor bolt on concrete pads known or expected to be less than 6" in depth. Do not install new feed bins on concrete pads that are known or suspected to be less than 6" deep.