Grower SELECT® Transformer 120/24V

AP®/Cumberland® PuraFire™ Heaters
The Hog Slat HSXF120-24 Universal Transformers is an exact replacement for the AP/Cumberland (G20-5036) OEM Transformer. It mounts and wires identical to the OEM installed transformer.

Hired-Hand® Super Saver XL™ Heaters
The Hog Slat HSXF120-24 Universal Transformer mounts the same as the Hired-Hand (H6401-2911) OEM transformer. Wiring will require the following steps:
Step 1: Cut old transformer leads (black, white and 2 yellow) next to transformer.
Step 2: Remove old transformer from heater (save two mounting screws). Note: Green ground wire under bottom mounting screw. Strip all 4 old leads (black, white & 2 yellow) approximately ½”.
Step 3: Assemble new Transformer using saved mounting screws. Be sure to reattach green ground wire to bottom transformer mounting screw.
Step 4: Using appropriate size wire nuts, attach black transformer lead to stripped black lead. Repeat for white lead and either yellow lead. Attach red lead from new transformer to remaining stripped yellow lead. Tuck leads in cabinet and close door.

Replacement for AP/Cumberland part number: 20-5036

Replacement for Hired Hand part number: 6401-2911

*Use of manufacturer part numbers for reference purposes only