Push-In Style Poultry Water Nipple

Create your own chicken or poultry watering bucket with these easy to use push-in style drinking nipples!

Features & Benefits:
• Polypropylene and stainless steel construction made to last
• Included rubber gromet ensures leak-proof seal
• Pin is easily activated by poultry from 360°
• Does not require a drip cup
• Designed to be used with gravity fed systems (do not use under pressure greater than 1 psi)
Installation Instructions:
1. Drill an 11/32" - 3/8" (9.3mm) hole in a 5 gallon bucket or other container that will hold water. (If installing more than one nipple, space evenly so that they can be used by multiple birds at the same time)
2. Slip the black rubber grommet into the hole to ensure a tight fit.
3. Wet the narrow end of the red body for lubrication and slide it into the black rubber grommet until the wide part of the body is tight against the grommet.
4. Mount or hang your new chicken waterer so that the metal nipple pin is eye level with your birds.
*Your chickens or other poultry will learn to drink from the nipple very quickly. To aid this process, you can hold one of your birds and push their beak against the nipple so it feels the water, or simply tap the nipple so that it begins to drip water to get the birds' attention and peak their curiosity. Once one bird starts to drink from the nipple, the rest will quickly do the same.*