Hog Slat® Submersible Cool Cell Pumps

Previous productHog Slat® Jet Pump (3/4 HP ...

Next productUS Motors® 3/4 HP Jet Pump ...

The Hog Slat pump features a re-designed VORTEX IMPELLER resulting in a unit with a LOWER HEAD PRESSURE with HIGHER VOLUME. This combination allows our pump to service a longer cool cell run.

~ Scroll down for pricing and options ~

Manufacturer: Grower Select®

Get 3/4 hp performance from a 1/2 hp pump!

Electrical usage is decreased by up to 25%.

Pumps typically used for cool cell systems are adapted from other industries; waste water, sump pumps, etc. They are designed with a higher head pressure and low volume to lift water as high as 35’....designed to pump water out of a basement.

We went to one of America’s leading pump manufacturers with a request to build a pump specifically designed for cool cell systems. The Hog Slat pump features a re-designed VORTEX IMPELLER resulting in a unit with a LOWER HEAD PRESSURE with HIGHER VOLUME. This combination allows a Grower Select pump to service a longer cool cell run.

Grower Select Cool Cell Pump Chart

Oil-filled motor
Epoxy coated, cast iron housing
2” discharge with 1 ½ bushing to adapt to most systems
2” bottom suction inlet
9’ waterproof power cord
Silicon carbide seal
115 / 230 Volt- 5.5/2/7 amps
15.87" high x 9.5" wide
1 Year Warranty from date of purchase

Overview
CA Prop 65 Warning
Reviews
Contact Us

Get 3/4 hp performance from a 1/2 hp pump!

Electrical usage is decreased by up to 25%.

Grower Select Cool Cell Pump Chart

Oil-filled motor
Epoxy coated, cast iron housing
2” discharge with 1 ½ bushing to adapt to most systems
2” bottom suction inlet
9’ waterproof power cord
Silicon carbide seal
115 / 230 Volt- 5.5/2/7 amps
15.87" high x 9.5" wide
1 Year Warranty from date of purchase

WARNING: This product can expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.