Activator Plus - 5 Gallon Pail

ACTIVATOR PLUS contains specifically selected microbial organism that inoculate, activate and enhance the break down of suspended organic solids found in nutrient rich retention waste and sludge.
ACTIVATOR PLUS is an all natural ready to use product. Used as directed, ACTIVATOR PLUS is designed to stimulate the breakdown of waste solids; reduce gas production, foaming, and associated odors.
ACTIVATOR PLUS is to be mixed with water and applied evenly to the heavily crusted area whether it is a deep pit containment or a pull plug/flush system. For an all-natural, cost effective way to eliminate your crust, ACTIVATOR PLUS is your solution.

• Reduces sludge build-up
• Prevent Crusting
• Reduces flies and odors
• Extremely easy to use
• 100% natural and safe for all animals

DIRECTIONS FOR USE:

CALCULATE AREA

L x W = Total Square Feet

CALCULATE VOLUME

L x W x D x 7.5 = Total Gallons

SELECT DOSAGE & TREAT

Crusted Waste System

Add 1 lb. of Activator PLUS® per 100 sq. ft. of crusting/foaming surface area
Example: 200 sq. ft. of surface area requires 2 lbs. of Activator PLUS

Day 1

• Puncture holes in crust layer before adding Activator PLUS
• Mix 1 lb. with 2 gallons of water, apply evenly
• Repeat every 14 days until top crust is liquefied
• After normalization, treat with AgraSphere® or Activator PLUS

Pull Plug/Flush System

Add 0.25 lbs. of Activator PLUS per crate or every 50 sq. ft. of area
Example: 200 sq. ft. of surface area requires 1 lb. of Activator PLUS

Day 21-28 – After flushing repeat Day 1 dosage plan

• Repeat every 21-28 days until pits flush clean
• Treat directly after flushing when waste residue is moist
• Add 1 inch of water to the flush pit prior to treating
• Add Activator PLUS to the pit, mix 1 lb. with 1 gallon of water and apply evenly
• Wash excess solution into the pit
• Allow disinfectants to dry prior to treatment
• Maintain external storage by adding AgraSphere
• Repeat twice yearly or as needed to maintain performance

Deep Pit Containment

Add 100 lbs. of Activator PLUS per 1,000 head swine grower/finisher, 400,000 gallon storage capacity, or 1 lb. per 150 sq. ft. of surface area
Example: 2,000 head swine grower/finisher requires 200 lbs. of Activator PLUS

Day 1 – Add 100 lbs.

• Add 1 lb. to 2 gallons of water
• Apply evenly to the waste holding surface area
• Repeat in 10-14 days with 50 lbs. if top layer is not liquefied
• Treat yearly at pump out time by adding 50 lbs. directly into containment facility on final agitation