Filters

Personal menu

Double Door Hog Feeder

The FARMSTEAD double door hog feeder is designed to feed up to 8 pigs to market weight. Galvanized metal construction built to last in outdoor environments.

Manufacturer: Hog Slat®

SKU: FS401

Free shipping

$260.47

Qty:

FREE STANDARD SHIPPING ON THIS ITEM IN THE CONTIGUOUS USA!

Great for use during 4H projects, raising show pigs or growing pigs outdoors.

The FARMSTEAD double door hog feeder is a heavy duty 20 gauge galvanized metal feeder that is designed to feed up to eight pigs to market weight. The galvanized metal pig feeder is designed and constructed to perform and last in outdoor environments as well as barn settings.

The top door opens from the rear to allow easy filling with feed from outside the pen, and the weather resistant metal trough covers can be easily removed by pulling a pin and sliding the attachment rod out. An adjustable feed flow gate allows you to control how much feed is present in the trough to reduce waste. Rear mounting holes allow the feeder to easliy be attached to solid walls or fencing. Ships unassembled, simple assembly required.

FARMSTEAD FS401 Double Door Hog Feeder Assembly Instructions & Parts List

• Double door design provides enough feeding capacity for 8 pigs
• Heavy duty 20 gauge galvanized metal construction designed to last both indoors and outdoors
• Zinc plated hex head bolts will not strip out during assembly or tightening
• Feed flow gate helps reduce wasted/spoiled feed
• Easily mounted to walls, fencing or other support using pre-punched mounting holes

Capacity: Approx 3.7 bushels (185 lbs. @ 50 lbs./bushel)
Assembled Dimensions: 35"H x 19"D x 24"W
Feeder Weight (Empty): 48 pounds

Complete your setup by adding an AquaChief Watering Cup, standard drinking nipples or a heated outdoor drinking trough to provide a consistent, clean water supply for your hogs.

Overview
CA Prop 65 Warning
Reviews
Contact Us

FREE STANDARD SHIPPING ON THIS ITEM IN THE CONTIGUOUS USA!

WARNING: This product can expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

Existing reviews

Well Made heavy duty hog feeder

Got two of these last week and so far they are working great. I believe these will hold up for years to come. Very happy with the product. Assembly was very easy and it holds plenty of feed. I have already recommended this product to others.

From: William | Date: 3/6/2018 9:03 AM

Was this review helpful? Yes No (32/4)

Built tough

Don't waste your money on anything at other stores. This is the real deal and should last for years.

From: Matthew | Date: 5/9/2020 9:23 PM

Was this review helpful? Yes No (3/0)

Only buy Hog Slat

No feeder in this style is perfect, but this one is built stout. Instead of cheap rivets, this feeder is held together by nuts and bolts. Set the inside flow gate to it's lowest setting so your hogs don't waste feed or stop it up too fast. You will have to clean beneath the flow gate every few days. Mud from the hogs noses and crumbs they've made will stop it up. The only thing that would make this a 5 star versus a 4 would be if neoprene washers were included in the assembly. This would prevent moisture from entering around bolts. Down here in the south that is a problem. A little shot of silicone around them helps.

From: Guest | Date: 7/24/2020 3:15 PM

Was this review helpful? Yes No (7/0)

Buy this!

This thing is stout. Just free fed 3 Herefords to 300lbs and they didn't put a dent in it.

From: Guest | Date: 2/22/2021 5:17 AM

Was this review helpful? Yes No (2/0)

Solid Hog Feeder

I purchased this feeder for my two hogs. After putting it in their pen (and making sure it was secure and not going to get knocked over), the hogs starting eating out of it right away. It is solid steel and I have no doubt it will hold up for years to come. The instructions were easy enough to follow and it took about an hour to put together. It has rained several times and the food has stayed dry. I would definitely recommend this feeder. .

From: Guest | Date: 5/24/2021 7:57 AM

Was this review helpful? Yes No (5/0)

Question

Since it's a free feeder how do you control the amount of feed they get?

From: Guest | Date: 3/19/2023 3:04 PM

Was this review helpful? Yes No (0/0)

A manager responded to this review

There is an adjustable gate in the feeder's trough that allows you to control the amount of feed that can flow into the trough from the feeder's hopper.

Rock Solid

We bought this for the four Berkshires we're raising on pasture this year. It is built really well and shows no sign of wear. The pigs are rough on it (as they are on everything) but it's holding up great! I just have 2 posts on either side of it and a ratchet strap around the body to keep it in place. Love it.

From: Guest | Date: 8/6/2023 11:39 PM

Was this review helpful? Yes No (2/0)

Your name *

Your email *

Enquiry *

Customers who bought this item also bought

Trojan® Gravity Flow Model 75 Nipple Kit

SKU: 13235

Quick, efficient way to quickly provide water in pig pens using a barrel or other gravity flow tank.

$23.38

Trojan® Model 75 Gravity Nipple

SKU: 13875G

Trojan Model 75 pig water nipple, specifically designed for gravity water flow pressure installations.

$13.38

Single Door Hog Feeder

SKU: FS400

The FARMSTEAD single door hog feeder is designed to feed up to 4 pigs to market weight. Galvanized metal construction built to last in outdoor environments.

$185.95