Shop Online

Use in non-contact animal areas.

Unloader weldment with stub shafts and bearing for 6" rigid auger assemblies.

Micro sail switch for Hired Hand® Super Saver XL 75K & 225K btu forced air furnace heaters.

Replacement digital Temperature Probe for Multfan® IC and ECS controls. 1' long.

1/2" galvanized conduit hanger for high pressure system piping.

Full flow spinner suspended between two bearing for reliable performance.

1/8" Stainless steel curtain Cable Clamp

11-Pin 6X156 Relay Base

24" 4-Bladed Replacement Fan Blade with 1/2" Bore

Chicken catching rod with hook and plastic handle. 45-1/2" total length.

Standard 4.2 oz

Painted finish.

The most effective way to cover seams between any type of interior paneling.

AP® fiberglass composite fan prop replacement for GAPP-24 fans.

Replacement relay for AP Chain Disk Controls GAPCD-500&600

Unloader weldment With Stub Shaft And Bearing for 4" Rigid Auger.

Polystyrene replacement insert for B1200 Raydot.

Pan Standard Cone-Classic Flood Feeder

5 pound bucket of loose pellets that produce effective knockdown during clean-out.

For instant reassurance that your fence is working. To setup, clip onto the fence wire and push the lead into the ground. If the voltage drops below 3000V, the Live Fence Indicator starts to flash intermittently and if the voltage drops below 2000V, the Live Fence Indicator will stop flashing altogether.

Gasolec® gas jets for poultry brooder heaters.

Axle for plastic idler guide return wheel in Grow-Disk™ drive unit.

Single transfer plate assembly with slide gate. Use with all GrowerSELECT® models. Includes hardware kit.

Replacement Lovejoy coupling for Hired Hand® PowerTrak® curtain machine (H6602-0236).