Shop Online

Windstorm™/AirStorm™ tensioner assembly comes with splash guard for belt drive fans. (excludes Windstorm™ 36" fans)

Unloader weldment With Stub Shaft And Bearing for 6" Rigid Auger. To only be used for systems with 6 inch auger shafts that have a 1 inch inside diameter.

GrowerSELECT® high limit switch, 320°F, manual reset. Fits Hired Hand® 225K models.

Replacement 3 wire limit switch assembly for Hired Hand® PowerTrak® curtain machine.

Lubing® transition adapter fitting connects 22mm square drinker line to 22mm (~7/8") regulator outlet.

Lubing® transition adapter fitting . 28mm square female end and 22mm round male end with o-ring.

SWASHEQUIPMENT™ will provide shine and gloss to equipment as well as protection from farm soils and grime. Surface Applications: Tractors, trucks, cars, mowers, combines, composters, windrowers, tillers, etc.

Replacement motor pulley for Windstorm™ fan, high capacity model, 4.5" diameter.

Windstorm™ tensioner assembly for Windstorm™ 36" fans.

20 mesh screen for 1-1/2" in-line cool cell filter.

360 Degree 25 GPH

Two independent slides allow separate control of two augers passing through unloader.

Tension spring to allow automatic adjustments of ventilation inlets and return feed drop cables.

Once treated with SWASHHOUSE™, it will become difficult for unwanted matter to build-up on surfaces. Any soils that may build up are actually held away from the surfaces by the water soluble film “shield.”

Replacement caster wheel for Highcroft cart model 9. Tire is 4.10/3.50-4 with 10-1/2" O.D. and a width of 4-1/2". Plate dimensions are 4" x 4-1/2" with 1/2" holes. Priced each.

Hired Hand® low pressure gas switch for models 75M & 225M heaters.

Replacement 9 wire limit switch assembly for Hired Hand® PowerTrak® curtain machine.

High pressure reducing bushing 3/8" FPT x 1/2" MPT for power washing systems.

Stainless steel suspension cable roll for ventilation inlet and feed drop actuation. 1/8" diameter in 400' roll.

SWASH Dust-Repel is a soil releasing, non-acidic, and non-corrosive product that can be applied to plastic, fiberglass, or galvanized steel fans, cowlings, shutters, louvers, and light traps.

1/2" Straight Tee galvanized or stainless steel

Replacement digital Temperature Probe for Multfan® IC and ECS controls. 20' long.

3/16" Stainless Steel Cable Clamp

Premium 6 oz.