Shop Online

Each touch-up is applied as the final touch-up for covering adhesives and leg builders and provides excellent hair-like coverage. Quick-drying with the most natural look on the market.

The ThermAlarm II is well-suited to applications requiring a narrow high-low temperature range, or where recurring temperature fluctuations of only a few degrees must be sensed.

Toggle switch, DPDT, 10 Amp 250 Volt. 6 prongs.

#10 x 1-1/2" Hex Head Screw - White

Install with our extended anchor bearing to help prevent binding and auger plugging on tandem feed bin installations.

3/8" nut zinc

4'0" 16 ounce clear vinyl curtain. Cold crack resistant to -40°F.

Bag Of 30

Replacement 8' power cord with socket and black plastic handle for Adjusta Heat heat lamp assemblies.

Removable top for Classic Flood™ support cone. Use with (HS8000-5R) only.

(Key 40-13) Filter screen for the Gator-XL medicator.

GrowerSELECT® float valve compartment access cover.

Hog Slat® 4' x 6' Poly Creep Mat is made with durable High Density Polyethylene and has a rib around the edge for better rigidity.

LB White® 1/4" x 10' gas hose with adapter for forced air heaters.

Includes three bottle collars (20mm, 30mm,33mm), 20mm/100m Fast Fit and metal luer lock needle nut.

(Part # 25) PVC Sheet For European Crate Rear Door 19" X 19-1/2" X 1/8" for Euro farrowing crate

(Part # 17) Sampson Bow Bar 7' 6'' for Sampson farrowing crate (painted)

Protect new slats from excessive wear and help slow erosion on older slats with slat mats.

3/8" replacement connecting nut. Fits all models of Stenner pumps requiring 3/8" nuts. Priced/sold each.

Each touch-up is applied as the final touch-up for covering adhesives and leg builders and provides excellent hair-like coverage. Quick-drying with the most natural look on the market.

Time Delay Relay - Normally Open

1/2" nut zinc

1/4" galvanized 7x19 extra flexible aircraft cable.

1/4" V-bolt, stainless steel.