Shop Online

Vantek® N1 Solvent is a must for keeping tools and equipment free from curing resin build up.

1/2" x 1-1/2" Bolt zinc

3/8" Main Burner Tubing for GRO40-L2, GRO40-L3, & GRO40-L9 brooders (part #32 in diagram 1), as well as GRO40-CR-N5 & GRO40-CR-L5 brooders (part #29 in diagram 2).

Replacement Plunger Bottom Seal for Dosatron DM11F

1/2" x 2" Bolt zinc

(Part #33) 1/4" Pilot Burner Tubing for GRO40-L2 brooders.

1/8" nylon hex head plug with MPT.

Herculite sets the standard in quality and high performance livestock curtains.

Herculite sets the standard in quality and high performance livestock curtains.

(Part #7) Replacement 1" thrust bearing assembly with support block for Airstream® Curtain Controller machine (GCC3630).

American Coolair® Fan Disc for 24" & 30" Fans

Burner gasket for Gasolec® G12 brooder heater.

Replacement Screws for Lid for Dosatron DM11F (11 required)

A highly visible yellow sign that warns that a fence is electrified. Easily clips onto fence wire and is required by law, to be used at least every 265' on boundaries and anywhere else public have access to a fence.

(Part #13) Hired Hand® Motor Mount for Hired Hand® PowerTrak machine.

Hold Down Clamp for Gun Assembly for Burn-Easy® Incinerators. Will also work with Wayne® Diesel Burners (not shown in diagram).

Replacement inlet ring and screen for National Incinerator HD500 propane (LP) and Natural Gas (NG) models. Works with LP Gas incinerators as well (part #16 in the diagram).

Motor 1/2 HP 90v DC for Pax egg collector

Lubing® flush breather unit with 24" standpipe. Designed for use with aluminum support rail.

Old Style Fan Shaft for ACME® Fans

Replacement black washer for Plasson® Broiler drinker.

Switch Assembly Curtain Machine

1/2" x 2-1/2" Bolt zinc

(Part #34) 1/4" Pilot Burner Tubing for GRO40-L3 & GRO40-L9 brooders.