Shop Online

Replacement mechanism top for Plasson® Broiler drinker.

V-Clamp (manifold support) for GRO40-L2, GRO40-L3, & GRO40-L9 brooders (part #24 in diagram 1), as well as GRO40-CR-N5 & GRO40-CR-L5 brooders (part #20 in diagram 2).

1.9mm Main Burner Orifice - LP for GRO40-L2, GRO40-L3, & GRO40-L9 brooders (part #25 in diagram 1), as well as GRO40-CR-N5 & GRO40-CR-L5 (part #21 in the diagram 2).

3/8" x 2" Bolt zinc

6'0" 4.1 oz., Single Hem Curtain

(Part #18) Aerotech® 30 RPM Gearmotor w/ Brake

American Coolair® Fan Blade for 42" NBF Fans

Replacement Lower Stem Nut for Dosatron DM11F

Clear PVC feed line tube for Grow-Disk Chain Disk feed systems. 2.36" OD x 10' long.

Exclusive 2' wide pad! Hog Slat’s H2-XCELL cool cell pad is manufactured from 100% Virgin Kraft Paper, oven-cured with acrylic polymer glue and fungicides for superior cooling performance and increased lifespan. 3/4" ProTech coating resists damage from UV light and mechanical cleaning processes.

Replacement motor for National Incinerator HD 500. Works with the LP Gas incinerators as well (part #12 in the diagram).

Rugged 1/2 HP submersible pump with cast iron housing built for continuous operation in cool cell tanks. Automatic operation.

Deep Penetrating, Roller Applied Epoxy Overlay for Long Term Protection The CSS System is a medium-build (1/16”-1/8”) chemical-resistant overlay system created by combining 440LV EPOXY with FUMED SILICA. CSS is designed to create a thickened overlay that is roller applied for new or slightly worn, slats, troughs, and floors. The BROADCAST Aggregate is applied to the wet epoxy slurry until the surface looks dry, creating additional wear resistance and non-slip texture. Designed for use on substrates exposed to chemical and physical wear.

(Part #11) Wayne® Diesel Burner Oil Line Assembly for Burn Easy® Incinerators.

(Part #26) #31 Main Burner Orifice - NG for GRO40-L2, GRO40-L3, & GRO40-L9 brooders.

3/8" x 2-1/2" Bolt zinc

Replacement Nuts for Lid forDosatron DM11F (11 required)

(Part #10) Hired Hand® Shaft Rod Assembly for Hired Hand® PowerTrak machine.

#50 Main Burner Orifice - LP/Butane for GRO40-L2, GRO40-L3, & GRO40-L9 brooders (part #27 in diagram 1), as well as GRO40-CR-N5 & GRO40-CR-L5 brooders (part #23 in diagram 2).

(Part #14) 1/8" x 3/4" Cotter Pin for Proterra® AGLA47859 & AGLA48028 Curtain Winch Series.

3/8" x 3" Bolt zinc

Standard 4.2 oz

American Coolair® Fan Blade for 48" NBF & NCFB Fans

Replacement Nut for Transfer Body for Dosatron DM11F ( 6 req)