Blog posts tagged with 'concrete stud repair'

It’s not news to pork producers that hogs are hard on equipment. Just normal wear and tear will damage even the stoutest equipment.

One tough repair is a loose anchor bolt in concrete walls or floors.   Whether it’s a wall bracket, divider panel or gestation stall leg, they can all work loose with the constant “banging” from large hogs.  This not an easy repair; typically the anchor has to be removed and the hole drilled either larger or deeper to hold a new stud.

The new EPO-SET 400 makes this repair much easier.

EPO-SET 400 is a two-part polymer especially formulated for repairing loose anchor bolt studs. Simply clean the loose debris out of the hole around the anchor.  Place the mixture into the void and it sets up in ten minutes with full strength in two hours.

EPO-SET is  easy to use because of the unique dual cartridge system for use in a standard caulking gun.

The standard sized tube contains two separate chambers that mix inside the static mixing nozzle.  No need to buy an expensive two-tube caulking gun or mix the two parts in a tray before using.  Just squeeze the handle and the blended mixture comes out the nozzle.  Makes it easy to direct into holes and cracks in concrete.

You can watch our video at http://hogslat.com/epo-set-400  to learn more.