We just released our new SowMAX ebook.
It’s the illustrated manual on feeding sows in lactation with SowMAX. See the section on ordering hardware and brackets to add SowMAX dispensers to your farrowing crates.
Click here to download your free copy.
Go to our web page to watch SowMAX videos .
With the USDA Animal Disease Traceability (ADT) rules now in place there is an increasing emphasis on livestock traceability within State and Federal agencies and the livestock industry. More and more producers are hearing about Official ID products and specifically to this article, how it pertains to swine.
There are two main categories when it comes to Official ID for Swine. There are “840” tags and there is the “Swine Premises Tag”. Below are the details and common questions for both.
What is an 840 tag?
840 tags are USDA approved tags for official individual animal identification. They will have a unique 15 digit number that always starts with “840” which is the country code for the United States. A manufacturer has to be approved by the USDA to produce a specific 840 tag.
What is a common use for 840 tags in Swine?
Increasingly 840 tags are being required for Swine Shows, State and County Fairs and Auctions. They can also be used for Interstate Commerce.
How do I purchase 840 tags?
You must have a registered Premises ID before you can purchase 840 Tags. If you don’t have your Premises ID you should start with contacting your State Animal Health Agency. You can find your respective state’s contact information at the following link: http://www.usaha.org/Portals/6/StateAnimalHealthOfficials.pdf
Once you have your Premises ID you can order your 840 tags and tag applicator by Destron Fearing from Hog Slat. (See chart below)
Why is a Swine Premises tag commonly referred to as a PIN tag?
Swine Premises tags are official location identification for cull breeding stock (cull sows and boars). The minimum requirement is for them to be used on cull breeding animals just prior to entering harvest channels from their farm of origin.
What does PIN stand for?
Premises Identification Number. It is a unique 7 character alpha-numeric national site identifier.
Can I use them for identifying feeder pigs/weaner pigs for movement and/or show pigs?
No, they are for use with animals in the breeding herd only.
Why was January 1st, 2015 important for Swine Premises tags?
That was the date that the swine industry and packers/processors agreed on to make PIN tags a requirement of sale. If a producer wants to receive full value for their cull breeding animals from that date forward, the animals need an Official Swine Premises tag in their ear before leaving their farm of origin.
When should I apply the PIN tags to my animals?
Most producers are applying them to new breeding animals as they enter the breeding herd and are using it as their management tag. You may also apply them when culling an animal from the farm, just prior to the animal entering harvest channels.
How do I purchase Swine Premises (PIN) tags?
You must have a registered Premises ID (National 7 character alpha-numeric ID) before you can purchase Swine Premises Tags. If you don’t have your Premises ID you should start with contacting your State Animal Health Agency. You can find your respective state’s contact information at the following link: http://www.usaha.org/Portals/6/StateAnimalHealthOfficials.pdf
Once you have your Premises ID you can order your Swine Premises tags and tag applicator by Destron Fearing™ from Hog Slat. (See chart below)
Hog Slat also offers a wide selection of Destron Fearing™ livestock identification tags for your cattle, swine, sheep and goats. Click here to shop the entire line of animal identification tags and accessories.
Our newest product offering for backyard flocks helps reduce feed loss from pests like mice, rats and wild birds. Known as a treadle feeder, the Feed-O-Matic incorporates a step activated gate to control access to the feed trough.
The treadle requires two pounds of weight to open the slide gate. As a chicken steps on the treadle to eat, it is depressed, and the gate opens. When the chicken finishes and steps off, the treadle rises shutting the gate to limit access to lighter weight pests.
The trough featu
res several refinements to limit feed loss as the chickens are eating. Solid plastic dividers prevent feed from piling up in the corners and falling out. A feed-saving plastic lip on the trough keeps birds from “raking” feed out of the trough as they eat.
Constru
cted of 20 ga. galvanized steel, the Feed-O-Matic holds 26.5 pounds of feed. A plastic lid keeps the feed hopper clean with a snap latch to secure it.
To order go to http://hogslat.com/feed-o-matic-chicken-feeder
Hog Slat’s introduction of the Poly Lamp improves several features of plastic heat lamp shades used in swine farrowing houses. Plastic heat lamp shades have become popular since being introduced several years ago. Polypropylene shades don’t dent or corrode like aluminum shades. Plastic shades also have a some cushion or “bounce” when knocked against the crate or creep panels reducing bulb breakage.
The Hog Slat’s Poly Lamp improves several key features of the plastic heat lamp, most notably to the nylon fixture.
First, the nylon fixture screws together on the shade top, instead bolting. The two-piece fixture reduces breakage occurring with the bolt-on style of earlier models.
Second, we use a rigid fixture instead the flexible type used on other poly lamps. The rigid design eliminates cord twist when replacing bulbs.
And third, the porcelain socket resists heat damage better than plastic types.
The Poly Lamp comes with a choice of hanging options; adjustable sliding poly hanger on the 9′ cord or a wire hanger mounted on fixture top.
Rated a maximum 250 watts at 120 volts, the Poly Lamp is UL listed. The Poly Lamp also comes with an extended Three-Year Warranty.
Overall the Poly Lamp is an improved version of earlier plastic lamp shades at very attractive price. For ordering information go to http://hogslat.com/hog-slat-poly-heat-lamp
Hog Slat’s launch of AirStorm fiberglass fans continues our commitment to reducing the price swine and poultry farmers pay for production equipment. Manufactured at our facilities in Iowa and North Carolina, AirStorm fans offer dependable performance at very attractive prices. Here is a look at several key features illustrating the quality designed into AirStorm fans.
Quality starts with Resin Transfer Molded (RTM) fiberglass housings. Fiberglass parts produced by a RTM process have two finished surfaces and high glass-to-resin ratio. The result is a very finished looking product with high weight-to-strength characteristics. A direct side-by-side comparison of competitive brands shows AirStorm housings to be noticeably thicker. Polyethylene discharge cones reduce weight and cost.
True airfoil vanes on the PVC shutters reduce air drag to improve fan delivery. Full-length spring steel rods, instead of short endpins, keep the vanes securely mounted into the frame.
Heavy-weight, stainless steel motor mounts, and hardware offer more protection from rust and corrosion than comparable aluminum mounts. Stainless Steel (36″ & 54″) or composite (24″) props outlast plastic or aluminum and stay “in-balance” through actual on-farm conditions. High service factor motors provide protection against varying line voltages common with rural power sources.
The lower purchase price of AirStorm fans results from a different type of distribution model. The traditional marketing channel for ventilation equipment consists of a manufacturer selling fans to a local dealer who marks the price up before selling to livestock producers. The cost of AirStorm fans is lower because we manufacture and sell directly to the end user. Hog Slat controls the distribution chain from start(manufacturing and sourcing) to finish (sale to the end user) and can limit the amount of “stacked margins” in the final purchase price. (See more about Margin Stack) Our network of local stores provides service at a cost lower than typical dealer distribution systems.
For pricing and ordering information go to Airstorm Fans
Building a poultry drinker by inserting poultry watering nipples into the bottom of a common five-gallon plastic bucket is very popular for backyard flocks. Bucket waterers are inexpensive, sanitary and relatively trouble-free.
We would like to introduce you to an improvement on this simple concept, a product we like to think of as the Ultimate Bucket Drinker.
The Ultimate Bucket Drinker is uniquely designed with three recessed sections with preformed nipple fittings molded into the bottom of the bucket, allowing for easy handling and an effective method for watering backyard flocks.
One key feature of the Ultimate Bucket Drinker is the three recessed sections. These allow for the bucket to be placed stably on the ground when filling with water, a feature that is not possible with the standard drinker with nipples screwed into the bottom of the bucket.
A second benefit of the Ultimate Bucket Drinker is raised watering nipples. This raised design prevents any dirt or debris that is in the water to plug the watering nipples. Instead, any dirt or debris in the water will settle to the bottom corners of the bucket.
The nipples themselves are commercial grade; trigger activated with extra top filter.
The Ultimate Bucket Drinker includes an easy on/off lid, hanging/carrying handle and adjustable
hanging cord, allowing you to regulate the ideal drinking height as your chickens grow.
The Ultimate Bucket Drinker goes together fast…no drilling or gluing necessary and costs less than other pre-packaged kits on the market.
To order go to http://hogslat.com/adjustable-chicken-drinking-bucket-with-3-nipples.
We spoke with Hog Slat engineers, Tyler Marion and Tim King about the differences between using a jet or submersible pump to fill evaporative cooling systems. Here’s a quick synopsis of our discussion.
1) Jet pumps are more reliable because they can run dry for a period of time. For instance, if you discover during morning chores a leak occurring overnight had drained the system, a jet pump would still be working. A submersible pump that runs that long without water will need to be replaced.
2) Jet pump repairs are less costly. The impeller and motor are two individual components; a bad motor can be replaced separately. Submersible pumps are a single unit.
3) Jet pump repairs and service are easier. A jet pump system is all above ground…a submersible pump must be pulled from the sump for repairs. A drain plug on the GrowerSELECT jet pump allows easy access for service and winterizing.
4) The integrated trash basket on a jet pump protects the pump from debris.
5) Submersible pumps are designed to move waste water from underground applications; low volumes with high head pressures. Jet pumps are a better choice for evaporative cooling applications as they move larger volumes of water at reduced head pressures.
6) One of the advantages cited for using a sump/submersible pump system is the sump acts as an extra reservoir for the system. The bottom trough of an 80′ long system holds about 300 gallons of water. A typical sump only holds about 30 gallons; really an insignificant amount. The main purpose of a sump area is to provide a place where a submersible pump can run in water so it doesn’t burn up. (see 1.)
To order go to jet pump
Appropriate maintenance and troubleshooting of a Grow-Disk chain feeding system will lead to smooth operation and a longer lifetime of the components.
Use this inspection checklist as a guide to maintaining your Grow-Disk feed system.
**Caution: Disconnect power before performing any maintenance.
If you experience an issue with a Grow-Disk Feed System, initial machinery inspection is important. Any troubleshooting exercise should begin with a thorough investigation of the machine, process, design, operation, and system maintenance records. To assist in troubleshooting the Grow-Disk feed system, use the Grow-Disk Troubleshooting Chart.
To learn more about Grow-Disk feed system visit http://www.hogslat.com/grower-select-grow-disk-feed-system
It’s not news to pork producers that hogs are hard on equipment. Just normal wear and tear will damage even the stoutest equipment.
One tough repair is a loose anchor bolt in concrete walls or floors. Whether it’s a wall bracket, divider panel or gestation stall leg, they can all work loose with the constant “banging” from large hogs. This not an easy repair; typically the anchor has to be removed and the hole drilled either larger or deeper to hold a new stud.
The new EPO-SET 400 makes this repair much easier.
EPO-SET 400 is a two-part polymer especially formulated for repairing loose anchor bolt studs. Simply clean the loose debris out of the hole around the anchor. Place the mixture into the void and it sets up in ten minutes with full strength in two hours.
EPO-SET is easy to use because of the unique dual cartridge system for use in a standard caulking gun.
The standard sized tube contains two separate chambers that mix inside the static mixing nozzle. No need to buy an expensive two-tube caulking gun or mix the two parts in a tray before using. Just squeeze the handle and the blended mixture comes out the nozzle. Makes it easy to direct into holes and cracks in concrete.
You can watch our video at http://hogslat.com/epo-set-400 to learn more.
When Bryan Foods announced their decision to close the state’s only slaughter plant, Prestage Farms in Mississippi changed the structure of their existing operation. Part of the complex was converted to breeding stock production to supply gilts to other company farms. In addition, Prestage launched a unique plan in 2012 to convert some of the existing finishing sites to breeding, gestation and farrowing.
Russ Goss, Production Manager along with Todd Griffin, the operation’s Maintenance Manager gave us the details of the conversion.
The original finishing sites consist of eight, 40’ x 176’8” buildings designed to hold 880 head of market hogs.
First part of the plan consisted of creating a dedicated breeding site at one former finishing site. One of the buildings was left unchanged and used as an isolation unit, with only the original 30″ penning swapped out for 40″ high gestation gates. The other seven buildings were switched over to breeding with each holding 336 stalls. The sows remain in the stalls for 42 days after breeding. After preg-checking, the sows are trucked to one of the converted gestation/farrowing sites. The gestation and farrowing sites were retrofitted using four of the buildings as farrowing and four as gestation. Each gestation barn is sized to fill two of the farrowing buildings.
The gestation floor plan lays out 20) 15’10” wide x 18’6” deep pens with 24) gestation stalls located on one end. . Each pen is designed to hold 14 sows allowing for 21 square foot per animal. Each pen has five feeding stanchions located along the center alley and ten on the outside wall.
Adjustable feed drops drop the rations into the stainless steel trough below.
When we asked Russ about the decision to go with pen system versus stalls, he explained, “We feel stanchions are the best choice for group housing compared to the ESF options that we looked at. We think stanchions are easier for our staff to manage and there is less equipment to maintain and repair.”
Russ commented, “The sows adapt to the stanchions fairly well. There’s some fighting the first day we put them together, but they settle down after that. Without a doubt group housing requires a higher level of stockmanship from our people, but the farm staff has learned to manage the system without a lot of trouble.”
Crews removed the old slats and equipment, after opening up a section of the end wall. Supported by the existing slat walls, trussed TriDek flooring spans the entire building with traction brakes located in the center of the crate providing the sows with better footing. Four rows of 33 farrowing crates were installed on the flooring for a total capacity of 132.
Prestage selected a 5’x 7’ Advantage finger style crate with stainless steel rear door panels and SowMAX dispensers above the feeders. Four feed lines run the length of the building to fill the dispensers.
Russ explained Prestage’s previous experience with SowMAX, “We just do a better job feeding sows in lactation with the SowMAX. It eliminates any guess work; we just fill the hoppers twice a day and the sows eat to appetite. They can eat at night during hot weather, and we know they are getting all the feed they want even on the weekends.”
He continued “Improved sow body condition is one of the biggest benefits we get from using SowMAX. Almost all of our sows will score a two or three coming out of the crates”
Canada
中国
Polska
România
Україна
Méjico
